How to Make a Wall Mounted Wine Rack

Perhaps you are looking for a wall mounted wine rack, well maybe you did never consider the idea of making your own wall mounted wine rack; keep in mind that the process is actually not all that hard, and that as long as you gain the necessary knowledge beforehand, it should be no problem at all.

How do I Make my own Wall Mounted Wine Rack?

It is quite easy to make your own wall mounted wine rack; one design in particular is one which holds the bottles in a cantilevered position and which employs a minimal use of materials. The only materials that you need for this design are wood, screws, paint, and primer. You will also need a table saw, bandsaw or jigsaw or scrollsaw, disc sander, hand drill or drill press.

This project should take you about 4 hours to complete, and the first thing that you need to do is get all of the required materials and tools together, as it is a much better idea to have everything prepared before starting the project, so that you can progress with the issue without any interruptions at any time during.

The next thing that you have to do is cut the wood in order to create the two parts of the wall mounted wine rack, the base and the loops, and then you need to lay out the location of the loops. Remember that each loop is going to be fastened to the base with a pair of wood screws from behind, and that you should mark specific hole locations for the loops so that the screw will not end up hitting the large hole that you created in each loop, and also make sure to drill through clearance holes for the wood screws.

After all of this is done, next is the step to do the coating; You should make sure to lightly sand all of the surfaces in order to make sure that there are no sharp edges or rough areas, and after putting on a coat of primer and letting it dry, you then want to finish up by using some durable paint and make sure to let this dry as well.

As well, you may want to then recoat with the paint or with a layer of polyurethane in order to increase the durability of the coating overall.